Select language here

header right mypopart
Get an answer, share your tip
header left myfunnywords

FAQs & Tips

Please check out our tips and frequently asked questions for additional instructions and advice.
If you still have doubts, don't hesitate to send us your question!
We would also be delighted to receive your own hints and tips so we can publish them on this page and inspire other Baby Art users!

All FAQs and Tips

You can view the full list of retailers under the “Stores/Where to buy” heading on our website.

Baby Art products are completely safe, even for newborns: they are non-toxic, have been dermatologically tested and are safe for your baby and you to use.

Each product has been assessed for toxicological and dermatological safety according to Regulation (EC) 1223/2009 to ensure safety equal to that required by cosmetics regulation. It can be safely used for baby’s skin.


All Baby Art products have been designed for use with children from birth to 3 years old, so it is perfectly safe to use any Baby Art product as soon as your baby is born. With sculptures, the smaller the baby, the easier it is to make the plaster cast and the more delightful the result! For impressions made using Baby Art modelling clay, the recommended age is from birth to three years old, or as long as the child’s hand or foot fits in the frame. There is no age limit for painted impressions – the whole family can put their impression alongside the baby’s, providing they all fit in the frame!

All Baby Art products have been designed so that anyone can use them and no particular skill is required. All you have to do is follow the instructions provided and all the stages involved in making it (proportions, drying time etc). The impressions really are child’s play and there’s no risk of them going wrong because you can start over again as often as you want if you don’t like the result. The sculptures involve slightly more tricky stages (with mixtures) but they have been developed so that they are very easy to make. It is important to read all the instructions thoroughly before starting in order to prepare everything you to make the cast and not to lose time between stages.

In order to obtain an optimal result, we recommend to make a first trial on a sheet of paper, since the print cannot be wiped off the Christmas ball if you are not satisfied with it. Apply a generous layer all over your baby’s hand using the roller provided and  gently put his hand on the ball to get a nice personalized Christmas Ball for your Christmas tree.

The advantage of the printed impression is that you can start again many times if you are not fully satisfied of your first trial. Just knead the clay and roll it out. Then put your baby’s hand or foot and gently press each finger to make a distinct impression. Finally, cut properly the clay and seat your printed impression in your frame.


As indicated in the instructions, knead the clay for at least 30 seconds before rolling it out. The longer you knead, the easier it will be to make the print.

We recommend you do your imprint on a sheet of paper (baking paper or aluminium foil) on a flat surface. This means you can move it for drying elsewhere and can easily remove the impression from the paper to turn it over while drying.

Start by thoroughly kneading the clay to warm it. When you roll it out in the Magic Box using the small wooden rolling pin, take your time so that you achieve a smooth, even result. If necessary, you can use your fingers to spread it all the way out to the edges. If you’re not happy with the way you’ve spread out the clay or with the result of your impression, you can start from the beginning again and knead the clay once more. Take care not to let the clay start to dry!


You don’t need to keep the child still to make the impression. All you have to do is press each little finger or toe onto the clay to make a beautiful, precise and distinct impression. Then gently remove it straightaway from the obtained cast.

If you’re not happy with the impression, you can start again straightaway: form a ball again and knead the clay. Take care not to leave the clay too long before starting again otherwise it might dry out!

Leave your impression made in the Baby Art clay to dry for six hours at room temperature, then turn it over and leave it to dry further for at least twenty-four hours. You can leave it to dry in the open air for a few days if you think the impression is still a bit soft.

Leave your product to dry at room temperature – so neither too hot nor too cold. That way you’ll avoid getting cracks due to accelerated drying.

To get the best possible impression, we recommend that you apply a generous layer of paint on your hand using the roller provided. For an adult hand, you can go as far as using the entire tube of paint supplied with the Baby Art product; for a child, use half the tube. Please also ensure that you spread the paint over the whole of your hand (no gaps) so that the impression of your hand is marked well on whatever medium you are using. Gently put your hand on the frame with your fingers well spread out, but without pushing too hand to avoid sliding, and that way you’ll get a beautiful hand impression.


With the wooden frames, you can clean off the impression as soon as you make it (without letting it dry) using a sponge and a solvent (no scourers so that you don’t leave any marks on it). Gently rub the impression until the whole painting disappears. If using paper or cloth, you are advised to do a test in advance on a standard sheet of paper.